A complete range of barbells for every type of training. Olympic, hybrid, and specialized barbells; all suitable for weighing, powerlifting, bodybuilding, and CrossFit workouts. The category also includes preloaded barbells, hexagonal bars, EZ curled barbells, and super pump bars.

BARBELL WEIGHTLIFTING/POWERLIFTING

GUIDE TO THE SELECTION OF BARBELLS

We offer a wide range of barbells that can be classified into three categories: Olympic, hybrid, and specialist.

Olympic

Olympic weightlifting or weightlifting barbells built according to IWF standards.
At the top of the line, we find the two PREMIUM models with black chromed bars: 9015/4 MALE, 9015/5 FEMALE. These are barbells built with steel and high traction values. These Olympic barbells feature the best construction techniques for pull-up and thruster exercises and droppings on the flooring.
Just like all our Olympic barbells, the knurling is medium, suitable for training, especially in terms of the health of the hand.
These barbells are designed to obtain the best possible solution between requirements of use, construction quality, and production costs.
The 9015/4C is the model with the most performing steel and with the same internal equipment of the premium barbell collars.
The 9015/8 is instead the model with lower performance features, as bars with high traction values and high production costs are not always necessary. For this reason, the technical data sheet of this latter barbell also shows the maximum loads per type of operation.

Hybrids

In this category, we find two barbells: 9015/3 TRAINING BARBELLS 185 and 9014 TRAINING BARBELLS 140.
This line of barbells offers the essential features of the Olympic ones, differing from them in their overall length: 185 and 140 cm. This difference is useful in terms of overall dimensions and training, as these barbells, thanks to the reduced length of the bar, are incredibly versatile and high performing.

Specialists

The category of specialized barbells is broad because each barbell is created in response to specific technical needs of training and use.

9015 OLYMPIC BALANCER FOR POWERLIFTING: born in our gym, it is an atypical Olympic barbell with a bar diameter of 32mm instead of the traditional 29mm.

9015/7 AXLE 50 BALANCER: barbell with a very thick grip diameter, 51 mm, suitable for athletic preparation programs.

9014/1 ALUMINIUM LIGHT BALANCER and 9015/1 INTRODUCTIVE LIGHT BALANCER: these are two light barbells ideal for learning weightlifting techniques; pull-up and thruster movements. The first one is a real light technical barbell. The second one represents an economical solution useful also to train and teach counting with more barbells in the setting of group lessons.

9027 CURLED EZ BARBELL and 9027/2 CURLED EZ PREMIUM BARBELL: classic curled barbells for biceps training. Effective and sharp the first one, while the second one comes with pads and superior finishing. 9011/1 SAFETY SQUAT BARBELL: barbell with shoulder support pads useful in overcoming certain limitations determined by joint mobility that would impair the ability to perform squats properly. In terms of training variation, it should be mentioned that a higher control on the weight load has a positive effect on the versatility of the tool. Leading to better execution of lunges, single-leg exercises, Bulgarian squat, step up.

8710-8745 Preloaded barbells and 8610-8645 EZ preloaded barbells: these are two sets of 10-45 kg preloaded barbells, consisting of 10 barbells per set. A classic of the physical culture because the preloaded barbells allow the maximum ease of use, especially in the climbing series, in the supersets and all similar techniques with no breaks between exercise series.

TRICEPS BAR 9027/1: is a one-of-a-kind barbell, created for triceps training, and offers the possibility to make alternative grips compared to traditional barbells.

9012 Olympic Hex Bar and 9012/1 Super Hex Bar: these are two original versions of the hexagonal barbell. The first is an old-style hex bar on which we introduced several functional innovations. The second one is instead an evolution born in the first place from the need to make the loading of weight plates easier.

9026 FARMER WALK BARS: born for walking with weights in hand, they have turned out to be practical multi-purpose rockers with a 50 mm handle and reduced dimensions.

PREMIUM MALE OLYMPIC BARBELL- Cod. 9015/4

– WEIGHT: 20 kg

– LENGTH: 2200 mm

– LENGTH OF GRIPPING PART: 1310 mm
– DIAMETER OF GRIPPING PART: 28 mm

– LOAD ADAPTORS (collars): rotating
– EQUIPMENT: 8 needle roller bearings, two sleeves
– TIGHTENING SYSTEM: 4 Seeger
– LOAD ADAPTERS DIAMETER: 50 mm
– LOAD ADAPTERS LENGTH: 415 mm
– RIDGE: flattened diamond medium
– DESCRIPTION OF THE CENTRAL PART OF THE BAR: no center knurl
– MARKER: 810 mm (powerlifting) and 910 mm (weightlifting)
– TREATMENT OF THE SURFACE PART OF THE BAR: hard chrome black
– STEEL BAR: special, bonded reclaimed
– TRACTION RESISTANCE: tensile strength PSI 200,000
– STATIC LOADING CAPACITY: 700 Kg
– USE: Weightlifting

Read More
PREMIUM FEMALE OLYMPIC BARBELL- Cod. 9015/5

– WEIGHT: 15 kg
– LENGTH: 2010 mm
– LENGTH OF GRIPPING PART: 1310 mm
– DIAMETER O GRIPPING PART: 25 mm
– LOAD ADAPTORS (collars): rotating
– EQUIPMENT: 8 needle roller bearings, two sleeve bushings
– TIGHTENING SYSTEM: 4 Seeger
– LOAD ADAPTERS DIAMETER: 50 mm
– LOAD ADAPTERS LENGTH: 320 mm
– RIDGE: flattened diamond medium
– BAR CENTRAL TREATMENT: without knurling
– MARKER: 810 mm (powerlifting) and 910 mm (weightlifting)
– TREATMENT OF THE SURFACE PART OF THE BAR: hard chrome black
– STEEL BAR: special, bonded reclaimed
– TRACTION RESISTANCE: tensile strength PSI 200,000
– STATIC LOADING CAPACITY: 580 Kg
– USE: Weightlifting

Read More
MALE OLYMPIC BARBELL- Cod. 9015/8

– WEIGHT: 20 kg
– LENGTH: 2200 mm
– LENGTH OF GRIPPING PART: 1310 mm
– DIAMETER OF GRIPPING PART: 28 mm
– LOAD ADAPTORS (collars): rotating
– EQUIPMENT: 4 needle roller pads, two sleeves
– TIGHTENING SYSTEM: 4 Seeger
– LOAD ADAPTERS DIAMETER: 50 mm
– LOAD ADAPTERS LENGTH: 410 mm
– RIDGE: flattened diamond medium
– DESCRIPTION OF THE CENTRAL PART OF THE BAR: without knurling
– MARKER: 810 mm (powerlifting) and 910 mm (weightlifting)
– TREATMENT OF THE SURFACE PART OF THE BAR: hard chrome
– STEEL BAR: special
– TRACTION RESISTANCE: tensile strength PSI 132,000
– STATIC LOADING CAPACITY: 300 Kg
– MAXIMUM APPROXIMATE LOAD for Deadlifting: 180 Kg
– MAXIMUM APPROXIMATE LOAD for Squatting: 150 Kg
– MAXIMUM APPROXIMATE LOAD for Snatch/Clean & Jerk: 100 Kg
– USE: Multi-purpose

Read More
TRAINING BARBELL 185 - Cod. 9015/3

– WEIGHT: 14 kg
– LENGTH: 1850 mm
– LENGTH OF GRIPPING PART: 1280 mm
– DIAMETER OF THE GRIPPING PART: 28 mm
– LOAD ADAPTORS (collars): rotating
– EQUIPMENT: 4 needle roller bearings, two sleeves
– TIGHTENING SYSTEM: 4 Seeger
– LOAD ADAPTERS DIAMETER: 50 mm
– LOAD ADAPTERS LENGTH: 250 mm
– RIDGE: flattened diamond medium
– DESCRIPTION OF THE CENTRAL PART OF THE BAR: no center knurl
– MARKER: 810 mm (powerlifting) and 910 mm (weightlifting)
– TREATMENT OF THE SURFACE PART OF THE BAR: hard chrome
– STEEL BAR: special
– TRACTION RESISTANCE: tensile strength PSI 132,000
– STATIC LOADING CAPACITY: 300 Kg
– MAXIMUM APPROXIMATE LOAD for Deadlifting: 180 Kg
– MAXIMUM APPROXIMATE LOAD for Squatting: 150 Kg
– MAXIMUM APPROXIMATE LOAD FOR Snatch/Clean & Jerk: 100 Kg
– USE: Multi-purpose

Read More
TRAINING BARBELL 140 - Cod. 9014

– WEIGHT: 10 kg
– LENGTH: 1400 mm
– LENGTH OF GRIPPING PART: 1000 mm
– DIAMETER OF GRIPPING PART: 28 mm
– LOAD ADAPTORS (collars): rotating
– EQUIPMENT: 4 needle roller bearings, two sleeves
– TIGHTENING SYSTEM: 4 Seeger
– LOAD ADAPTERS DIAMETER: 50 mmm
– LOAD ADAPTERS LENGTH: 165 mm
– RIDGE: flattened diamond medium
– DESCRIPTION OF THE CENTRAL PART OF THE BAR: no center knurl
– MARKER: 810 mm (powerlifting)
– TREATMENT OF THE SURFACE PART OF THE BAR: hard chrome
– STEEL BAR: special
– TRACTION RESISTANCE: tensile strength PSI 132,000
– STATIC LOADING CAPACITY: 300 Kg
– MAXIMUM APPROXIMATE DEADLIFTING LOAD: 180 kg
– MAXIMUM APPROXIMATE LOAD FOR SQUATTING: 150 Kg
– MAXIMUM APPROXIMATE LOAD FOR SNATCH/CLEAN & JERK: 100 Kg
– USE: Multi-purpose

Read More
POWERLIFTING BARBELL 32- Cod. 9015

– WEIGHT: 20 kg
– LENGTH: 2208 mm
– LENGTH OF GRIPPING PART: 1329 mm
– DIAMETER OF GRIPPING PART: 32 mm
– LOAD ADAPTORS (collars): rotating
– EQUIPMENT: 2 needle roller bearings, four ball bearings, two sleeves
– TIGHTENING SYSTEM: 4 Seeger
– LOAD ADAPTERS DIAMETER: 50 mm
– LOAD ADAPTERS LENGTH: 410  mm
– KNURLING / RIDGE: medium
– DESCRIPTION OF THE CENTRAL PART OF THE BAR: a central knurl of 20 cm
– MARKER: 810 mm (powerlifting) and 910 mm (weightlifting)
– TREATMENT OF THE SURFACE PART OF THE BAR: hard chrome
– STEEL BAR: special, bonded tempered
– TRACTION RESISTANCE: tensile strength PSI 70,000
– STATIC LOADING CAPACITY: 650 Kg
– MAXIMUM APPROXIMATE LOAD for Deadlifting: 300 Kg
– MAXIMUM APPROXIMATE LOAD for Squatting: 250 Kg
– MAXIMUM APPROXIMATE LOAD for Snatch/Clean & Jerk: 200 Kg
– USE: Powerlifting

Read More
AXLE BARBELL 50 - Cod. 9015/7

•– WEIGHT: 20 kg
– LENGTH: 2120 mm
– LENGTH OF GRIPPING PART: 1310 mm
– DIAMETER OF THE GRIPPING PART: 50 mm
– LOAD ADAPTERS: non-rotating
– LOAD ADAPTERS DIAMETER: 50 mm
– LOAD ADAPTERS LENGTH: 390 mm
– RIDGE: no
– MARKER: no
– TREATMENT OF THE SURFACE PART OF THE BAR: micaceous iron coating
– STEEL BAR: standard
– STATIC LOADING CAPACITY: 300 Kg
– USE: Athletic preparation, Powerlifting

Read More
LIGHTWEIGHT ALUMINIUM BARBELL- Cod. 9014/1

– WEIGHT: 6.5 kg
– LENGTH: 1836 mm
– LENGTH OF GRIPPING PART: 1315 mm
– DIAMETER OF GRIPPING PART: 28 mm
– LOAD ADAPTORS (collars): rotating
– EQUIPMENT: 4 needle roller bearings, two sleeves
– TIGHTENING SYSTEM: 2 Seeger
– LOAD ADAPTERS DIAMETER: 50 mm
– LOAD ADAPTERS LENGTH: 243 mm
– RIDGE: medium
– DESCRIPTION OF THE CENTRAL PART OF THE BAR: no center knurl
– MARKER: 810 mm (powerlifting) and 910 mm (weightlifting)
– MATERIAL OF THE BAR: aluminum
– STATIC LOADING CAPACITY: 100 Kg
– MAXIMUM APPROXIMATE LOAD for Deadlifting: 80 Kg
– MAXIMUM APPROXIMATE LOAD for Squatting: 50 Kg
– MAXIMUM APPROXIMATE LOAD Snatch/Clean & Jerk: 80 Kg
– USE: Weighlifting – no tight grip, no drop.

Read More
LIGHTWEIGHT INTRO BARBELL- Cod. 9015/1

– WEIGHT: 3.5 kg
– LENGTH: 1680 mm
– LENGTH OF GRIPPING PART: 1280 mm
– DIAMETER OF GRIPPING PART: 28 mm
– LOAD ADAPTERS (collars): fixed
– LOAD ADAPTERS DIAMETER: 50 mm
– LOAD ADAPTERS LENGTH: 195 mm
– RIDGE: No.
– MARKER: 910 mm (weightlifting)
– MATERIAL OF THE BAR: steel
– STATIC LOADING CAPACITY: 100 Kg
– MAXIMUM APPROXIMATE LOAD Deadlift: 50 Kg
– MAXIMUM APPROXIMATE LOAD Squat: 30 Kg
– MAXIMUM APPROXIMATE LOAD Snatch/Clean & Jerk 40 Kg
– USE: Weighlifting – no tight grip, no drop.

Read More
PREMIUM EZ BARBELL - Cod. 9027/2

– WEIGHT: 9 kg
– LENGTH: 1205 mm
– DIAMETER OF THE GRIPPING PART: 28 mm
– LOAD ADAPTERS (collars): rotating
– EQUIPMENT: 2 ringlets, 2 pads
– TIGHTENING SYSTEM: Seeger
– LOAD ADAPTERS DIAMETER: 50 mm
– LOAD ADAPTERS LENGTH: 165 mm
– RIDGE: medium
– TREATMENT OF THE SURFACE PART OF THE BAR: hard chrome
– STEEL BAR: standard
– STATIC LOADING CAPACITY: 300 Kg
– USE: Bodybuilding

Read More
EZ BARBELL- Cod. 9027

– WEIGHT: 8 kg
– LENGTH: 1205 mm
– DIAMETER OF THE GRIPPING PART: 25 mm
– LOAD ADAPTERS (collars): rotating
– EQUIPMENT: 2 ringlets
– TIGHTENING SYSTEM: bolts
– LOAD ADAPTERS DIAMETER: 50 mm
– LOAD ADAPTERS LENGTH: 170 mm
– RIDGE: medium
– TREATMENT OF THE SURFACE PART OF THE BAR: chrome
– STEEL BAR: standard
– STATIC LOADING CAPACITY: 300 Kg
– USE: Bodybuilding

Read More
BILANCIERE SUPER PUMP - Cod. 1660

SUPER PUMP BARBELL

Barbell rubberised and chromed
for pump training

Read More
BILANCIERE SUPER PUMP IRON - Cod.1660/1

SUPER PUMP IRON BARBELL

Iron barbell for pump training
No bearings, no bushings
Painted without knurling

Read More

Showing 1–18 of 29 results

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.